kenbro 0 #1 Posted May 2, 2014 Picked up a snow blade model 0648BC01, vintage around 1989. Will it bolt right onto a 1994 312-8 or will I need to use an adaptor or fabricate something. I have not attempted yet, just curious if anyone knows off the top of their head.. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,515 #2 Posted May 3, 2014 Should fit if you have all the pieces Garry Share this post Link to post Share on other sites
Tankman 3,515 #3 Posted May 3, 2014 Good luck mounting the dozer blade, simple if you have all the pieces. Be sure to "report" when you try mounting the blade. The Forum needs to know! Share this post Link to post Share on other sites
stratostar250 919 #4 Posted May 3, 2014 As long as you have the mounting bracket on the rear end, you should have no problems! Share this post Link to post Share on other sites
kenbro 0 #5 Posted May 4, 2014 I went to a fellow horse owner that I know and looked at his plow hookup and realized that I did not get the rear hookup bracket when purchasing the plow. My fault for not researching enough about what I was buying. Anyway bought that on ebay since then. When it comes I will fit it up and report back. Thanks much for all the replies as they were very helpful. I am a newbie on this forum and in just 2 weeks time it has been of great help to me. What a worthwhile site it is. Thanks to all who work at making it possible.. Share this post Link to post Share on other sites
