artfull dodger 329 #1 Posted April 20, 2014 The input shaft seal on the hydrostatic pump on my C160 Auto is leaking, does someone have the part number and a price better than our local Toro dealer? They wont give up the number and want over $25 for that little seal. Thanks in advance. Mike Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #2 Posted April 21, 2014 Might have it. What is the original part number? Garry Share this post Link to post Share on other sites
artfull dodger 329 #3 Posted April 21, 2014 I dont have the number, cant see any on the outside of the seal, not gonna pull the seal till I change it out and the Toro dealer wouldnt devulge the numbetr Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,530 #4 Posted April 21, 2014 If the original was Wheel Horse part number 7877 CR 7475 Federal Mogul 480821 = CR 7474 Original seal 9008000-7501 = CR 7443 Dimensions .750"x1.316"x.250" Chicago Rawhide is now SKF I just checked the first C-160 Auto I came to and it used a Sundstrand hydro. Garry Share this post Link to post Share on other sites
artfull dodger 329 #5 Posted April 21, 2014 Thats the hydro in mine, Sunstrand. thanks for the part numbers Share this post Link to post Share on other sites
pfrederi 17,173 #6 Posted April 21, 2014 (edited) 7474 single lip $4.08 7475 double lip $10.80 Speedi sleeve 99076 $26.00 Edited April 21, 2014 by pfrederi Share this post Link to post Share on other sites
