curtis20 5 #1 Posted April 14, 2014 (edited) I have a workhorse 700 I just got with a 8 hp Briggs pull start on it. As I was working on it I noticed that only two motor mounting bolts were on because the way the motor sits on the frame it only matches up with 2 holes. So I think maybe I'll put a different motor on, but all the other motors I have looked at have the same spread on their bolts, so looks like no matter what I do I can only mount a motor on with 2 bolts. Will this be a problem? Does anyone else have this setup on theirs? Edited April 14, 2014 by curtis20 Share this post Link to post Share on other sites
bmsgaffer 2,054 #2 Posted April 14, 2014 Please don't double post your questions. Just post once, and a moderator will move if necessary. You will get the same number of people viewing it either way and it helps for others to see what has already been posted. Share this post Link to post Share on other sites
curtis20 5 #3 Posted April 14, 2014 Will do, sorry bout that Share this post Link to post Share on other sites
bmsgaffer 2,054 #4 Posted April 14, 2014 Thats no problem. Welcome to RS! Share this post Link to post Share on other sites
