squonk 39,129 #1 Posted April 7, 2014 Helped out one our contractor friends at work. He had a broken hub that was stuck. My usual puller tore the threads right out of it. No action shots but I had to get out the 'Heavy Artillery" The pop can is to reference the size. Share this post Link to post Share on other sites
stevasaurus 22,273 #2 Posted April 7, 2014 So...did it work? I assume it did. Share this post Link to post Share on other sites
squonk 39,129 #3 Posted April 7, 2014 Yes! It went " POP"! Share this post Link to post Share on other sites
can whlvr 991 #4 Posted April 7, 2014 herres a homemade puller,its angle iron and a 3/4 inch push bolt,it allways gets them off 1 Share this post Link to post Share on other sites
AMC RULES 36,961 #5 Posted April 8, 2014 Yes! It went " POP"! Yep, I see the can is open. 1 Share this post Link to post Share on other sites
boovuc 1,090 #6 Posted April 10, 2014 Jeez Don! Look at all the blood on your workbench! You should wear gloves when your working with that puller! Share this post Link to post Share on other sites
can whlvr 991 #7 Posted April 10, 2014 that's almost funny as I have been known to smash a finger or 2 once in a while Share this post Link to post Share on other sites
