tater83002 0 #1 Posted April 5, 2014 I'm new here and have a few questions. I have a 268 Hydro with a tiller attachment model # 79271. It needs a drive belt and the belt that runs the tiller. Can anyone help me with the sizes and/or part #'s. Thanks. Share this post Link to post Share on other sites
daveoman1966 3,839 #2 Posted April 5, 2014 According to Toro schematics: Drive belt for the 268H is # 92-6954 ($48). Drive belt for the tiller is # 92-7075 ($121). Share this post Link to post Share on other sites
boovuc 1,090 #3 Posted April 5, 2014 Hi Tater! Use those Toro numbers that Dave gave you from the Toro site to cross reference a NAPA belt. A word of caution though. The Toro belts are expensive as you can see but they last! They can last decades verses cheaper belts. I know you did not ask for this but my unsolicited advice to you is to go with the Toro drive belt and then get a NAPA belt for the tiller. You'll save money! Share this post Link to post Share on other sites
tater83002 0 #4 Posted April 5, 2014 Thanks for the info guys. Share this post Link to post Share on other sites
