Mike333 5 #1 Posted March 31, 2014 I am missing the idler pulley on my 42inch mower deck on my Raider. I have tried to find some numbers on the tractor but no luck, so I was hoping someone on here may know the part #. I also need a head gasket for the 14hp techy that is currently on it and can't find any info that either, she is in pretty rough shape but I think with some TLC it could be a good worker, any info is greatly appreciated,thanks again and Happy Spring to everyone!!! Share this post Link to post Share on other sites
Ed Kennell 41,959 #2 Posted March 31, 2014 Any pictures and model no.?? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,475 #3 Posted March 31, 2014 Perhaps this is what you need for the mower Garry Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,475 #4 Posted March 31, 2014 For the engine go to http://www.partstree.com/parts/ Type Tecumseh in the 2nd box and OH140 in the 3rd box. You will get 8 pages of results. Service manual for cast iron engines http://www.wheelhorseforum.com/files/file/2382-engine-tecumseh-8hp-to-18hp-cast-iron-smpdf/ Garry 1 Share this post Link to post Share on other sites
Mike333 5 #5 Posted March 31, 2014 I will try to get some pictures up after work,and sorry but no model numbers, plates are all missing,and the engine is not original. I do know for a fact the the engine is a techcumseh 14 hp,it came from a 1977 sears suburban. Share this post Link to post Share on other sites
Mike333 5 #6 Posted March 31, 2014 Thank you so much Garry,I have been pulling my hair out trying to find some info,I have said it befor and I will say it again,Red Square members are the best hands down!!! Share this post Link to post Share on other sites
Ed Kennell 41,959 #7 Posted March 31, 2014 (edited) Mike, A good starting point for finding info on any tractor is The Wheel Horse by Year Chart. You can find it by clicking on Manuals, then click Tractors, then scroll down to the chart. You will find tractor info for years 1955 thru 2005. You will find the Raider 10 was only made in 1970,71, and 72. 1970 ...Tecumseh.....4 and 8 speed tranny 1971... Tecumseh.....8 speed 1972......Kohler..........8 speed In 1969 there was only a Raider 12 made with a Kohler and 4 speed. Hope this helps. Edited March 31, 2014 by ekennell Share this post Link to post Share on other sites
Mike333 5 #8 Posted March 31, 2014 Thanks for info ekennell! That helps a lot,glad I know what I have now,As soon as I get home I will check out that list,wish I knew about it awhile ago,but that's the way it goes.Have a great day sir! Share this post Link to post Share on other sites
KC9KAS 4,744 #9 Posted March 31, 2014 Unless I am missing something, his RAIDER 10 has a 14hp Tecumseh according to his 1st post. Share this post Link to post Share on other sites
Ed Kennell 41,959 #10 Posted March 31, 2014 Unless I am missing something, his RAIDER 10 has a 14hp Tecumseh according to his 1st post. Yep, he knows it's not the stock engine. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,475 #11 Posted March 31, 2014 Mike, A good starting point for finding info on any tractor is The Wheel Horse by Year Chart. You can find it by clicking on Manuals, then click Tractors, then scroll down to the chart. You will find tractor info for years 1955 thru 2005. You will find the Raider 10 was only made in 1970,71, and 72. 1970 ...Tecumseh.....4 and 8 speed tranny 1971... Tecumseh.....8 speed 1972......Kohler..........8 speed In 1969 there was only a Raider 12 made with a Kohler and 4 speed. Hope this helps. If I may stick my nose in here The 1969 Raider 10 model 1-6041 used an HH100 Tecumseh but Toro has incorrectly identified it as a 1970 model. Garry Share this post Link to post Share on other sites
Ed Kennell 41,959 #12 Posted March 31, 2014 Thanks Garry, Is there any way to correct that on the WH by Years Chart ? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,475 #13 Posted March 31, 2014 It would take more smarts than I have to do it. That file has been posted in so many places I don't know how you could do them all. Garry Share this post Link to post Share on other sites
Ed Kennell 41,959 #14 Posted March 31, 2014 OK, I'll just correct my hard copy. Share this post Link to post Share on other sites
