edwalsh18 2 #1 Posted March 7, 2014 (edited) i just purchased a 1974 WH c120 with attachments. having never owned a wheel horse or any other type of garden or even lawn tractor before nor have i ever been around any i am completely new to this and need help identifying some parts that i have acquired in the deal. in this pic i circled a part that i cant figure out. Edited March 7, 2014 by edwalsh18 Share this post Link to post Share on other sites
Save Old Iron 1,571 #2 Posted March 7, 2014 a rear tongue hitch Share this post Link to post Share on other sites
squonk 43,710 #3 Posted March 7, 2014 Man a cultivator set, a mid grader and a tiller! Looks like the holy grail! 3 Share this post Link to post Share on other sites
KC9KAS 4,744 #4 Posted March 7, 2014 You should be able to attach the tongue hitch AND the slot hitch (to the right of the circled piece) at the same time. The slot hitch takes the place where the spacers are at on Save Old Irons picture. The tiller and mid mount grader blade uses a bracket that is attached to the rear axle...hope it is on the tractor. Share this post Link to post Share on other sites
squonk 43,710 #5 Posted March 7, 2014 I think that grader hooks to the mid hitch. The 50" hooks to the back. 2 Share this post Link to post Share on other sites
953 nut 59,735 #6 Posted March 8, 2014 You can find manuals for all of the attachments you have, they will help you figure out how they are mounted. Just look in the "Manuals" sertion on this site, they are a free download. Share this post Link to post Share on other sites
Tankman 3,523 #7 Posted March 21, 2014 (edited) Very nice attachments! The tow hitch and sleeve can be used together for sure! You will need a cable to raise 'n lower the sleeve hitch. A pin to mount both hitches to the tranny. Save Old Iron's pic shows the pin and two sleeves (spacers); one either side of the cast transmission. The spacers are not used when both hitches are used. Edited March 21, 2014 by Tankman Share this post Link to post Share on other sites
