JamesC-120 204 #1 Posted March 3, 2014 Does anyone know where I can get an OEM muffler for a c-120 used or new for a reasonable price? Thanks Share this post Link to post Share on other sites
Hodge71 665 #2 Posted March 3, 2014 (edited) You will not find an OEM. Nelson stopped making them years ago. I would suggest using a Gravely muffler. Nelson still makes them. The inlet is a side inlet and center exit. You can fab up a small piece of pipe to get the gasses out from under the hood. If you want, you can look into building a stack or possibly a decent used Nelson on ebay Edited March 3, 2014 by hodge71 Share this post Link to post Share on other sites
rmaynard 16,297 #3 Posted March 3, 2014 A new muffler should still be available from your local or online Toro parts dealer. Part #106918. Pricey though. Share this post Link to post Share on other sites
Hodge71 665 #4 Posted March 3, 2014 A new muffler should still be available from your local or online Toro parts dealer. Part #106918. Pricey though. I didnt know that Bob. My Toro guy said NLA…didn't tell me he could still get it but pricey. I might research this more for the 1974 C-160 restore Share this post Link to post Share on other sites
Kelly 1,033 #5 Posted March 4, 2014 A good dealer will take the time to look, then scare you, new are about $150-200 depending on the muffler, good used run $50 up 1 Share this post Link to post Share on other sites
JamesC-120 204 #6 Posted March 4, 2014 I might try the gravely one because I saw that is what other people used. Thanks for the help. Share this post Link to post Share on other sites
daveoman1966 3,839 #7 Posted March 4, 2014 I may have this muffler in my shop and will reply in the morning about it. my direct email is:daveoman@windstream.net Share this post Link to post Share on other sites
daveoman1966 3,839 #8 Posted March 4, 2014 Decided to look tonight... Yes, I have it. I am sending pics in a PM to you in a few minutes. Here is one pic of it Share this post Link to post Share on other sites
JamesC-120 204 #9 Posted March 5, 2014 Which is the input and which is the out put on the gravely muffler. Share this post Link to post Share on other sites
JamesC-120 204 #10 Posted March 5, 2014 I have seen them used in both ways and I think it was made to be used in one way. Share this post Link to post Share on other sites
rmaynard 16,297 #11 Posted March 6, 2014 Does anyone know where I can get an OEM muffler for a c-120 used or new for a reasonable price? Thanks You have to keep a watchful eye on places like eBay. Share this post Link to post Share on other sites
Hodge71 665 #12 Posted March 6, 2014 Which is the input and which is the out put on the gravely muffler. Gravely mufflers are side inlet and center outlet. I dont think they can be used backwards Share this post Link to post Share on other sites
