boondockboost 34 #1 Posted February 16, 2014 Hey everyone well I Picked up a snow blower for my raider 12 its in good shape and seems to be all there its a 6-0200 snowblower. Now my question is this. I know how to mount it and what not but I'm having an issue figuring out how to make it lift up and down. Or what parts I would need? He gave me a long bar with it by he said he doesn't think its for lifting it. Does anyone know anything about it? Share this post Link to post Share on other sites
Hodge71 665 #2 Posted February 16, 2014 You're going to need to post pics….your description will make much more sense when we can see. Then we will be able to accurately answer your questions….. Share this post Link to post Share on other sites
boondockboost 34 #3 Posted February 16, 2014 I believe I found an answer after searching. I'm missing a flag piece I believe its called that slides into lift rod. Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted February 16, 2014 I have lift flags send me a PM if your looking Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,499 #5 Posted February 16, 2014 6-0200 is the 32" basic unit. It required a 6-9112 completing package to mount on the Raider 12. 6-0200 6-9112 Garry Share this post Link to post Share on other sites
boondockboost 34 #6 Posted February 16, 2014 Now my only question gwest is the completing packages number shows a 37" blower and the blower I have is 32" should the drive belt for it differ much? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,499 #7 Posted February 16, 2014 Belt should be the same 6-9112 Completing package for 32" 6-0200 basic unit on long frame tractors 6-9112 Completing package for 37" 6-6211 or 6-6212 basic unit on long frame tractors Garry Share this post Link to post Share on other sites
boondockboost 34 #8 Posted February 16, 2014 So the part number listed for the belt is 9750 witch crosses to a gates 6969 but when they cross referenced it for me it comen out to a duck l569 but the belt is to short Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,499 #9 Posted February 16, 2014 5/8" x 69" is correct. The belt leaves the pto and travels under the V-idler, over the flat idler, down under the driven pulley and back to the pto on the top. Is that the way you have it? The belt used must be designed to withstand the reverse bending over the a idler. Not all and especially fractional horse power belts meet this spec. Garry Share this post Link to post Share on other sites
