Navig8r 132 #1 Posted February 13, 2014 So I looked at my horse, next to my Little Wonder push-blower, and a light bulb came on..... Could I remove the rear axle, and handle from the LW, and make a mount that would allow it to trail behind backwards (I would put a swivel wheel on the front of the blower) I kinda picture it following like a PTO rotary mower behind a larger tractor.... I figure I could use a home-made frame to mount it like the tiller..... or possibly even use the tiller frame.... This would keep it steady, and I could lift it if needed. Obviously in the brainstorming phase.... It would be nice to ride while blowing leaves... Anyone done something like this? Share this post Link to post Share on other sites
AMC RULES 37,196 #2 Posted February 13, 2014 Definitely sounds doable... I really like your caster idea too. Share this post Link to post Share on other sites
TT-(Moderator) 1,162 #3 Posted February 13, 2014 My contribution: Share this post Link to post Share on other sites
Navig8r 132 #4 Posted February 13, 2014 My contribution: Thanks!! Something like Steve's is what I had in mind, but a bit simpler, with the ability to lift it with the lift cable/chain for faster/smoother transport. I knew already that there were blower 'caddies' available to attach to many machines (I have a ZTR as well), but I was thinking of a more 'budget friendly' approach. 1 Share this post Link to post Share on other sites
