squonk 43,844 #1 Posted February 10, 2014 Got a 40' mid grader I want to restore. I need a good pic of the "Caution" decal so I can give it to Terry with all the correct wording and symbols. This is the decal. Share this post Link to post Share on other sites
cleat 7,260 #2 Posted February 10, 2014 I also have a similar blade to restore but right now it is buried under a couple feet of ice and snow. When it thaws out I will get some pictures of it. Cleat Share this post Link to post Share on other sites
Brrly1 1,146 #3 Posted February 10, 2014 Mike, while you are at it have him make more than one I will also need one for the D series blade that's being redone. Pretty sure it's the same. Share this post Link to post Share on other sites
squonk 43,844 #4 Posted February 10, 2014 Ok John. I hope to get the info soon. I don't want to sand it off until I get one and I want to get started on it Share this post Link to post Share on other sites
AMC RULES 37,196 #5 Posted February 10, 2014 I think mine has the later, red and white Toro version of the same decal on it. Share this post Link to post Share on other sites
Marv 982 #6 Posted February 11, 2014 Mike, I will look at mine tomorrow. I think the decal is good, if so I will get a picture for you. Marvin Share this post Link to post Share on other sites
squonk 43,844 #7 Posted February 11, 2014 Thanks Marvin. I found a picture that was clear enough to get all the info. Share this post Link to post Share on other sites
