gehosky c-125 2 #1 Posted February 6, 2014 Hello all took my motor apart today to find out what the problem was and i am in need of an intake valve and exhaust valve for my 301 12hp if anyone can help out please let me know i have limited funds at the moment. thanks in advance Share this post Link to post Share on other sites
smoreau 658 #2 Posted February 6, 2014 I would put in two new ones from stens. You can find them on e bay around $20 for both Share this post Link to post Share on other sites
gehosky c-125 2 #3 Posted February 6, 2014 looked they seem to be allot more than that from what i see if you seen them and know the item number could you let me know what it is please Share this post Link to post Share on other sites
smoreau 658 #4 Posted February 6, 2014 Wow, you are write! I got both mine about 3 years ago for $20 with free shipping and there was a lot of choices of venders then also. I see there around $30 know. Share this post Link to post Share on other sites
Fordiesel69 271 #5 Posted February 7, 2014 Post a wanted ad. Someone will have a punctured block they can salvage some valves out of. Share this post Link to post Share on other sites
gehosky c-125 2 #6 Posted February 8, 2014 Surprised a posted a wanted add and nothing so far oh well Share this post Link to post Share on other sites
rmaynard 16,363 #7 Posted February 8, 2014 Let me check my stock. I may have a new exhaust and intake valve that I can sell you for cheap. Share this post Link to post Share on other sites
shorts 182 #8 Posted February 9, 2014 Make sure to check your valve guides and repair/replace them if they are worn or the new valves won't hit the seats correctly Share this post Link to post Share on other sites
gehosky c-125 2 #9 Posted February 9, 2014 Thank you all for help waiting for new valves in the mail going to have to lap the valves and block so i bought some lapping compound and suction cup to do that. Another ? i have is there away to check the rings on the piston while i have the head of piston looks great and no scoring at all on cylinder wall problem looks like it was strictly valve issue Share this post Link to post Share on other sites
