oaktown1987 82 #1 Posted February 4, 2014 Did any wheel horses have lp heads Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Don1977 604 #2 Posted February 4, 2014 If you look on Brian Millers Engine site he has one listed for 10 to 14 HP for the small 1 1/8" exhaust valve. The later K, and M series engines had 1 3/8" exhaust valves. Share this post Link to post Share on other sites
Martin 2,130 #3 Posted February 4, 2014 my 1054 came to me with one. can't tell you if it was oem though...... 1 Share this post Link to post Share on other sites
Kelly 1,028 #4 Posted February 4, 2014 A few of the early Kohler 10hp engines have them, but you have to watch where the spake plug is located, I have some in stock if your looking. Share this post Link to post Share on other sites
joel_400 59 #5 Posted February 4, 2014 There are two of these heads, I have them with both designs. They even have the same casting number. One has a real small chamber with no depression between the valves and piston. The other has more of a conventional kohler chamber with the depression. Outside they look identical. Some people even try to sell the second type on ebay as lp heads which isnt quite right because an actual lp head usually sells for 125-150 or so and the other type goes for around 25. I will try to post some pics on this so you can see the difference. Like I say its all in the chamber design. Joel 1 Share this post Link to post Share on other sites
Wheel Horse Kid 104 #6 Posted February 4, 2014 A few of the early Kohler 10hp engines have them, but you have to watch where the spake plug is located, I have some in stock if your looking. Hey Kelly, My dad is looking for a couple of LP heads...Could you tell me what you are asking for your's and I can relay that info to him to see if he is interested? Thanks, Taylor Share this post Link to post Share on other sites
Kelly 1,028 #7 Posted February 4, 2014 Send me a PM for more info, I have two styles a standard and a thick one. Share this post Link to post Share on other sites
oaktown1987 82 #8 Posted February 4, 2014 How much u want for them kelly Sent from my iPhone using Tapatalk Share this post Link to post Share on other sites
Kelly 1,028 #9 Posted February 4, 2014 (edited) I'll sell you 2 for $150 including shipping, send me a PM Edited February 4, 2014 by Kelly Share this post Link to post Share on other sites
oaktown1987 82 #10 Posted February 4, 2014 Ok thanks Share this post Link to post Share on other sites
Wheel Horse Kid 104 #11 Posted February 4, 2014 PM Sent Kelly. Share this post Link to post Share on other sites