wheelhorsekid 141 #1 Posted January 26, 2014 What have you guys found to be the best option? The square box to connect the rims or the shaft that bolts right on the hub? Share this post Link to post Share on other sites
daveoman1966 3,621 #2 Posted January 26, 2014 I don't know which style would be better. I have a SQUARE set listed on flea-bay right now. It is item # 131091180869. These are well-made and should suit your needs. Share this post Link to post Share on other sites
wheelhorsekid 141 #3 Posted January 26, 2014 These seem simple to install and use, but I'm worried about the rim tweaking. Have you had any experience with that? Share this post Link to post Share on other sites
AMC RULES 36,954 #4 Posted January 26, 2014 Run square sets on a few of my 's, over all kinds of uneven surfaces... very stable, and no issues of the rims deforming to report here. 2 Share this post Link to post Share on other sites
daveoman1966 3,621 #5 Posted January 26, 2014 Each adapter takes FOUR 5/8" dia carriage bolts between the rims. When mounted, the two rims are about 1/2" apart or maybe a bit closer together. I have not had experience with either style and, therefore, cannot speak as to one type being better than the other. Here is another pic, showing the 4 tubes of each adapter. These are NOT thin-wall tubes and NOT flimsy by any sense of the imigination. Share this post Link to post Share on other sites
mrc 727 #6 Posted January 27, 2014 hi craig, great looking rj. love the duallys! regards mike in mass. 1 Share this post Link to post Share on other sites
dandan111 31 #7 Posted January 27, 2014 I had a cub cadet that had a factory dual wheel kit. I should have kept them but I really had no use for them. They looked nice on. Share this post Link to post Share on other sites
JERSEYHAWG / Glenn 4,487 #8 Posted January 27, 2014 hi craig, great looking rj. love the duallys! regards mike in mass. Craig, ditto that comment, very very nice. I also got a kick out of the invisible driver. lol Glenn 1 Share this post Link to post Share on other sites
can whlvr 991 #9 Posted January 28, 2014 I made a set of the square,they work great and cost me some time in the shop and some welding time 1 Share this post Link to post Share on other sites
