redrooster 83 #1 Posted January 23, 2014 While disassembling the rear portion of my C-141 I noticed this nylon washer laying on the transmission. I don't where it came from. Does anybody know where its home is? It really bugs me because I have been labeling everything. Thanks for any help! Share this post Link to post Share on other sites
AMC RULES 36,955 #2 Posted January 23, 2014 Maybe a stowaway, just along for a free ride. Share this post Link to post Share on other sites
rmaynard 14,932 #3 Posted January 23, 2014 Usually they are found on the rod that connects to the brake or clutch pedal. Share this post Link to post Share on other sites
redrooster 83 #4 Posted January 23, 2014 Kudos to you. After additional inspection I realize its off the break rod. Share this post Link to post Share on other sites
Fun Engineer 859 #5 Posted January 23, 2014 That rmaynard. Not only a smashing good looking, snowmobile suit wearing kind of guy. But he really knows his tractors. Share this post Link to post Share on other sites
rmaynard 14,932 #6 Posted January 23, 2014 (edited) That rmaynard. Not only a smashing good looking, snowmobile suit wearing kind of guy. But he really knows his tractors. Aw shucks, you are too kind Dave. Edited January 23, 2014 by rmaynard Share this post Link to post Share on other sites
KC9KAS 4,741 #7 Posted January 23, 2014 I have heard stories of so-called-friends putting an extra bolt or nut or odd piece into the pile while something mechanical is disassebbled just to cause havoc! Share this post Link to post Share on other sites
19richie66 16,979 #8 Posted January 23, 2014 We did that to a guy at work one time. He had a carburetor off of a japanese utility truck and I took an old ball point pin inner spring and laid it in his pile of parts on the bench. He went round and round trying to figure out where it went and when he gave up and went to lunch, i took the spring back. Then he couldnt find it so it made it worse. Finally had to tell him. Good fun. Were still friends, lol. 1 Share this post Link to post Share on other sites
AMC RULES 36,955 #9 Posted January 23, 2014 ...or so you think. Share this post Link to post Share on other sites
redrooster 83 #10 Posted January 23, 2014 I wouldn't want the payback LOL 1 Share this post Link to post Share on other sites
19richie66 16,979 #11 Posted January 23, 2014 He was cool with it.You would have to know the guy.He worked on one of the same trucks and couldnt figure out where a spacer went.Tossed it.I let him put it all back together and when he put the tire on and couldnt figure out why it drove funny,I handed him the spacer and then we had a lesson on front ends. 1 Share this post Link to post Share on other sites
