RJMcEachern 18 #1 Posted January 8, 2014 (edited) Hello, I am new to the forum, but not new to Wheel Horse. I have owned this since 2002, bought it with a dozer blade, wheel weights and tire chains. I am about to pull the trigger on a wheel horse snow thrower 0642ST06, just making sure this will bolt up to the 518-H. The seller says he has all the parts to attach it to the tractor, it looks to be immaculate and rarely used. Will this bolt up to my 518-H with no fitment issues? From my research it appears to "plug and play", but I am by no means any kind of expert. Thanks, RJMcEachern Edited January 8, 2014 by RJMcEachern Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #2 Posted January 8, 2014 Plug & play all the way! Hopefully the lift rod (a.k.a. "flag") has the lift assist spring provision too. Not a necessity on manual lift tractors, but your left arm will thank you. Share this post Link to post Share on other sites
RJMcEachern 18 #3 Posted January 8, 2014 Thanks! Yea after my research, I believe I need to make sure he has the flag, spring and lift rod? RJMcEachern Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #4 Posted January 8, 2014 ........ I believe I need to make sure he has the flag, spring and lift rod? You are exactly correct. Share this post Link to post Share on other sites
RJMcEachern 18 #5 Posted January 8, 2014 Awesome! You folks here rock! If he has the necessary parts I am buying it tonight. If he doesn't I might buy it anyway and ebay the missing parts. RJMcEachern Share this post Link to post Share on other sites
TT-(Moderator) 1,128 #6 Posted January 8, 2014 I did a post a while ago with the pictures and dimensions of the standard flag and lift tube: If you don't get the pieces and have the ability to make them (or have them made by a local shop) it might save you some $. Share this post Link to post Share on other sites
RJMcEachern 18 #7 Posted January 8, 2014 I should be able to make them myself, I have a 90 300ZX TT 5spd, 91 300ZX NA, Corvette, etc that I have had to weld, fab, drill, re-tap, you name it, just need the dimensions. This is all hopefully for naught(sp), but I have learned over the course of time and experience that the old boy scout motto is soooo true... Be Prepared! RJMcEachern 1 Share this post Link to post Share on other sites
wingrider 21 #8 Posted January 11, 2014 Welcome to Red Square from another fan from Illinois. I live about 55 miles north of you in Iroquois County. You won't be sorry you found the BEST PLACE EVER for Wheel Horse support. Wingrider Share this post Link to post Share on other sites
RJMcEachern 18 #9 Posted January 12, 2014 Wow thanks wingrider! I get up there now and then, mainly to Hoopeston, usually on a bike run... RJMcEachern Share this post Link to post Share on other sites
wingrider 21 #10 Posted January 12, 2014 I know a guy in Westville that sells WH parts on ebay that I've been trying to get to some Saturday and check out his operation, maybe we could meet up there. If interested send me a PM. Later Wingrider Share this post Link to post Share on other sites
RJMcEachern 18 #11 Posted January 12, 2014 I know him, I spoke to him yesterday. I am going to go buy an Eaton 1100 from him, his name is Stan. He lives in the south end of town, I live east of town in the country. We certainly could meet up there some saturday if you like. It needs to be before March though, autocross season starts in March and I am putting in new injectors, headers and exhaust for this upcoming season then just need to go the dyno and tune it RJMcEachern Share this post Link to post Share on other sites
jackhammer 544 #12 Posted January 17, 2014 Have fun here,, lots of info jackhammer w'ville il Share this post Link to post Share on other sites