jimrogowski 0 #26 Posted December 30, 2013 Thanks to all who have given suggestions! Over the weekend I had a chance to do some further testing. Pulling up on the clutch pedal did nothing, but taking a small wire brush to the big pulley attached to the tranny seems to have done the trick. With the tranny in Neutral...and the clutch out, I used a small round wire brush on the pulley as it was spinning. Cleaned the groove very well. The tractor now jumps when I let out the clutch too fast! I have this for sale...and now I feel like I'll be selling something that works correctly! Thanks again. Share this post Link to post Share on other sites