Snow Blowers

[Circus Man 0]

How hard is it to find a snow blower for my 1054? What kind of hardware do i need to run one? Never had one,know nothing about em. Thanks for any info!

[Teddy da Bear 11]

I have a 1054A and I do not know anything about a snowblower.

But if you go to the Toro parts viewer. Plug in your model (1054) it will come up

with a link to assembly drawings as well as attachments/options.

Hope you find it there.

[Circus Man 0]

The snow thrower for the tractor is ST-374orST-375 37"snow thrower use with PT-5 power take

Does anyone have one,or know where one is? and what should i expect to pay?

[wh500special 2,068]

I think you are going to have a hard time finding a thrower for that model of tractor. While the tractor is a real stud in the WH herd, it was phased out 40+ years ago and used some unique hardware to attach the implements. Post a wanted ad here and on the Yahoo groups and hope for the best. Also keep a close eye on eBay since this is the time of year when throwers start showing up regularly.

Prices for a used thrower depend heavily on time of year and location. You might get one as cheap as $50 but don't be surprised to find one in October/November for 5 times that or more.

Unless you're in a lake effect area, a blade might be all you need. You'd be surprised what a chained up, tall narrow tired tractor like yours can push. And, unless you're faced with daily dumpings, the blades are usually faster to use.

Best of luck,

Steve

[Circus Man 0]

Thanks Steve

This is the only snow thrower i have :imstupid:

[combatmp29r 27]

OK the horizontal guys will have to chime in here to make sure this is right, but HERE is one listed on ebay.

[Kelly 1,028]

Joel beat me to it.

[Teddy da Bear 11]

Ok....now it is time for me to be a good guy.

I have a 1989 snowblower that came set up for my GT-14.

I believe with a little fabin....it could work on the 1054.

This is a nice piece that was "funk a fide".

Someone sprayed the auger with undercoating..... It still

works fine.....just weird.

Email me if your interested.

[big mike 13]

Mike,is it undercoating or graphite paint?

They look the same.....pretty bad in my opinion,but it is supposed to work real good.

[Circus Man 0]

Thanks Joel

Im watching ,but my mileage cal.said 990mile round trip.($300.00 in fuel)

watching may be all that i do :omg:

[combatmp29r 27]

Ok remind me where you are again? We might be able to get it moved closer by wagon train. :banghead:

[linen beige 14]

Thanks Joel

Im watching ,but my mileage cal.said 990mile round trip.($300.00 in fuel)

watching may be all that i do

It's a little over a thousand miles for me, round trip, so I guess I'll just have to sit and watch too.

I'm getting used to doing that. :USA:

[Teddy da Bear 11]

No...it is definately undercoat....

I guess your going for originality as opposed to just needing something to throw the snow.

I am a lot closer than 900 miles. I am 270 miles distant.

[Circus Man 0]

Sorry about that Mike ,I ment to reply back .

A local mower shop has one for $50 dont know what it fits.

I appreciate the offer thank you.You know air craft stripper would probably take that stuff right off.But then it would need paint because it takes everything off :banghead:

[big mike 13]

Wonder why they would have sprayed undercoat on it.....one of the things that makes you go....hmmmmm.

[Circus Man 0]

Some people use it as a rust cover instead of a preventer

I hope that wasnt the case :USA:

[Teddy da Bear 11]

I don't think rust was the case.

I really think he was trying to quiet the unit...... :banghead: