Fishroe 261 #1 Posted December 8, 2013 Sorry to bother yal again but heres the deal. The parking brake switch has 3 terminals on it. There is a 3 wire plastic holder at the switch with only 2 wires in it. One is the ground and the other goes to circuit board. Do i need a 3rd wire. The wiring diagram only shows those 2 wires also. A little confusing because pto switch is just like this one and it uses all 3 terminals. Mine is a 414-8 model 31-14k801 1986 model. Any help would be appreciated. Share this post Link to post Share on other sites
cleat 7,177 #2 Posted December 8, 2013 No, the parking brake switch just turns on the warning light on the dash so only two terminals are required. Cleat Share this post Link to post Share on other sites
Fishroe 261 #3 Posted December 8, 2013 Thanks Cleat The 3 wire holder got me wondering So the tractor will start if it is in gear as long as the clutch pedal is depressed. Is that right? Share this post Link to post Share on other sites
Fishroe 261 #4 Posted December 8, 2013 Never mind the last post was thinking about something else. Thanks again cleat Share this post Link to post Share on other sites
