ibskot 37 #1 Posted December 5, 2013 So I am putting my 416 on hold a minute... problem is I was going to have the rear scrape on the 416 and keep the johnny bucket on the 312. Well, now I need to use the hitch on the 312 because I kinda need the scrape now. At least this weekend. What sized cable should I use? I got 1/8 inch cable today but started thinking when I got home that maybe I shoulda got bigger. The 1/8 has the strength but will the lack of size be a problem? Any thoughts? Share this post Link to post Share on other sites
WH nut 553 #2 Posted December 6, 2013 1/8 will do just fine Share this post Link to post Share on other sites
Wheel-N-It 2,976 #3 Posted December 6, 2013 Scott, sounds to me like its time to buy another Wheel Horse!!! Share this post Link to post Share on other sites
ibskot 37 #4 Posted December 6, 2013 Van...I'll hold at 2... unless I stumble on a killer deal of course. 1 Share this post Link to post Share on other sites
ibskot 37 #5 Posted December 6, 2013 Another thing, does the same cable extend freedom the lift to the hitch? Or is the cable supposed to link to a chain? Also, there is a screw knob on the left side of the "dash" right above the lift lever is. Are they related? Thanks Share this post Link to post Share on other sites
