keg 0 #1 Posted December 2, 2013 i have found it on here before but now i cant find the links. i am trying to install the rear lift on my 520-h i have all the pieces. does any one have pics or a link to a thread on this? any help is much apreciated. i know its preety much the same as my 314-8. Share this post Link to post Share on other sites
TT-(Moderator) 1,131 #2 Posted December 2, 2013 Cable installation is covered in the tiller manual: Parts list can be found here: http://www.partstree.com/parts/?lc=toro_consumer&mn=85518%2C+Clevis+Hitch&dn=3322-959-_9590002-0001 Share this post Link to post Share on other sites
rokon 64 #3 Posted December 3, 2013 There is a hole through the transmission that the non flared end of the cable tube pushes into. It will very likely be clogged with dirt making it difficult to see. Share this post Link to post Share on other sites
keg 0 #4 Posted December 3, 2013 thanks tt and rokon that jogged my memory lol. ive done it on my 8 speed just not the hydro. yes that thing was full of dirt and grass glad i took it apart to install lift it needed a good cleaning anyway. probbably a good idea to periodically clean around those hydros to keep the heat down. Share this post Link to post Share on other sites
