Jump to content
bowtiebutler956

A Gift From A Dear Friend

Recommended Posts

bowtiebutler956

 Well, I managed to get some of the sheet metal back on the tractor yesterday, as well as a few decals. I really like the way its turning out. I got the block back yesterday, so I focused on the engine today. The engine went together very nicely, and all clearances are within specs now. Sorry for how dark some of the pics are, but the flash on my camera died. :dunno:

 

Matt :flags-texas:

post-6076-0-04463300-1386465583_thumb.jp

post-6076-0-57679800-1386465600_thumb.jp

post-6076-0-41036500-1386465616_thumb.jp

post-6076-0-91362200-1386465631_thumb.jp

post-6076-0-11657300-1386465653_thumb.jp

post-6076-0-86522000-1386465675_thumb.jp

post-6076-0-38901100-1386465692_thumb.jp

post-6076-0-20287900-1386465707_thumb.jp

post-6076-0-98370600-1386465725_thumb.jp

post-6076-0-61194900-1386465744_thumb.jp

post-6076-0-73087900-1386465761_thumb.jp

post-6076-0-36948500-1386465779_thumb.jp

post-6076-0-72672600-1386465796_thumb.jp

  • Like 3

Share this post


Link to post
Share on other sites
 
posifour11

Just plain beautiful. Gary would be proud.

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 I managed to spend a couple hours working on the Case this afternoon. Finished bolting up most of the accessories to the engine, carb, muffler, shroud, etc.. Also added a few more decals, and I love the way new decals set a tractor off. :thumbs:

 

Matt :flags-texas:  

post-6076-0-99089500-1386545312_thumb.jp

post-6076-0-57717300-1386545329_thumb.jp

post-6076-0-31858600-1386545347_thumb.jp

post-6076-0-60363700-1386545368_thumb.jp

post-6076-0-66899000-1386545385_thumb.jp

post-6076-0-64354300-1386545406_thumb.jp

post-6076-0-80665900-1386545425_thumb.jp

  • Like 4

Share this post


Link to post
Share on other sites
 
RMCIII

That will look better than new when you get done. Looks amazing...

  • Like 1

Share this post


Link to post
Share on other sites
 
AMC RULES

It does now.   :handgestures-thumbsup: 

  • Like 1

Share this post


Link to post
Share on other sites
 
Jake Kuhn

Looking amazing matt!

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 Thank you RMCIII, Craig, and Jake for the encouraging words!  :thanks:   Thanks to my amazing wife, I had a new set of shoes show up for the Case today. :woohoo:  They are Deestone 23x10.50-12 6ply tires for the rear, and two Firestone 16x6.50-8 Tri Ribs for the front. These are my early Christmas prestent, and I must say she has fantastic taste in tires! :ychain:

post-6076-0-32311900-1386634006_thumb.jp

post-6076-0-12878500-1386634020_thumb.jp

post-6076-0-77010600-1386634037_thumb.jp

  • Like 6

Share this post


Link to post
Share on other sites
 
eb in oregon

Did that dual plane intake come off that tractor? :confusion-scratchheadblue:  When did they get v8's? :ychain:

You never know what an old "hot rodder" might try.

 

By the way Matt, that's nice work. Good job, I will enjoy seeing it all done with that awesome set of tires.

Edited by eb in oregon
  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 

Did that dual plane intake come off that tractor? :confusion-scratchheadblue:  When did they get v8's? :ychain:

You never know what an old "hot rodder" might try.

 

By the way Matt, that's nice work. Good job, I will enjoy seeing it all done with that awesome set of tires.

 

 Thank you, I appreciate it.  :thumbs:  You are correct about old Hot Rodders, just take a look at this thread by Hammerhead! The Copar Mopar!  

 

Matt

Edited by bowtiebutler956

Share this post


Link to post
Share on other sites
 
Wheel-N-It

Matt, everything about this project is absolutely 1st class!!! Gary picked the perfect friend to carry out his last wishes of having this tractor restored. The Seaton family is cetainly in my prayers, especially as they are close friends of yours. Thank you for keeping us posted of your progress with this special project. :handgestures-thumbupright:

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 Thanks for the kind words Van, and a really big thanks for keeping the Seaton family in your prayers. They really need it right now.

 

Matt :flags-texas:

  • Like 1

Share this post


Link to post
Share on other sites
 
Ken B

That looks excellent Matt! The new ag and tri rib tires are going to put it over the top. Gary is just about as proud as can be right now! He'll be with you every time you take that tractor for a ride with a smile on his face.

A few months before my best friend passed he gave me his vintage roll away tool box. He inherited it from his father many yrs. ago and it meant a lot to him.  I love that tool box, I always admired it. It is smack dab in the middle of my garage and I will always have it.

  • Like 2

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 Thanks Ken!

 I got to ride it today!! :woohoo:  The K301 runs fantastic, and tractor feels great as well. I still have to paint the grill black, and install the headlights. I still haven't started on the mower deck either, but I'll get on that soon. I'm very happy with the way its tuning out, and I know Gary would love it! :thumbs:

 

Matt :flags-texas:

post-6076-0-68230400-1386806282_thumb.jp

post-6076-0-49499700-1386806313_thumb.jp

post-6076-0-69210500-1386806341_thumb.jp

post-6076-0-09859900-1386806407_thumb.jp

post-6076-0-24509200-1386806440_thumb.jp

post-6076-0-12376800-1386806504_thumb.jp

post-6076-0-36763700-1386806571_thumb.jp

  • Like 4

Share this post


Link to post
Share on other sites
 
Jake Kuhn

Turning out sweet matt!   :bow-blue:  :bow-blue: :bow-blue:   makes me miss my 155 again lol.... :banghead:

  • Like 2

Share this post


Link to post
Share on other sites
 
kaiser

holy moly that's one sweet case. nice work, your friend would be proud!

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

 Just thought I'd give a quick update. I painted the grill to the OE semi-flat black finish, and installed the headlights as well as the front Case decal. I'm hoping to start on the mower deck tomorrow. :thumbs:

 

HERE IS A VIDEO

 

http://www.youtube.com/watch?v=Innr_zXg-ZU&feature=youtu.be

 

Matt :flags-texas:

post-6076-0-31342500-1386984022_thumb.jp

post-6076-0-59091000-1386984036_thumb.jp

post-6076-0-81191100-1386984055_thumb.jp

post-6076-0-90481700-1386984065_thumb.jp

  • Like 8

Share this post


Link to post
Share on other sites
 
dclarke

Outstanding work, Matt. You gotta be proud of that tractor! :thumbs:  :thumbs:

  • Like 1

Share this post


Link to post
Share on other sites
 
Shynon

Wow Matt that looks amazing. :handgestures-thumbup:

  • Like 1

Share this post


Link to post
Share on other sites
 
RMCIII

Turned out extremely nice Matt... Can I borrow your wife for my Christmas present also? Jealous over that gift. Mine would never even think to do something like that... :banghead:  :handgestures-thumbupright:

Share this post


Link to post
Share on other sites
 
Wheel-N-It

SWEET !!!!!!!  I love those big tri-ribs on the front!

Share this post


Link to post
Share on other sites
 
bowtiebutler956

Outstanding work, Matt. You gotta be proud of that tractor! :thumbs:  :thumbs:

 Indeed I am, and it serves as a wonderful remembrance of Gary. 

 

 

Wow Matt that looks amazing. :handgestures-thumbup:

 Thank you, and I'm happy with the way it turned out as well. 

 

 

Turned out extremely nice Matt... Can I borrow your wife for my Christmas present also? Jealous over that gift. Mine would never even think to do something like that... :banghead:  :handgestures-thumbupright:

 Thanks, and although I don't consider myself a stingy person, I don't lend out my wife. :ROTF:  She's definitely a keeper! :thumbs:

 

SWEET !!!!!!!  I love those big tri-ribs on the front!

 Van, I really like these big tri-ribs as well. They just plain look good. Thanks

 

 I finally got around to tearing apart the mower deck, and it wasn't in as good of shape as I had previously thought. Its missing one of its baffles underneath, which is no big deal, as I can build a new one, and weld it in. However the spindle housings are ate up with corrosion! One of them even has a hole eaten clear through it! :jaw:  I recently made a friend who has a bunch of Case tractors, and he said he thinks he has some extras I can get from him, so hopefully that works out. They still make them new, but their almost $100 a piece for just the housing, no shaft or bearings! :scared-eek:  The replacements are cast iron, not aluminum. The deck itself is still very solid, although it does have a few rust pits, I don't need it to look perfect, but it has to be mechanically sound, as I plan on using it. Here are a few pics. Thanks

 

Matt :flags-texas:

post-6076-0-91582400-1387141081_thumb.jp

post-6076-0-11314600-1387141098_thumb.jp

post-6076-0-04928000-1387141113_thumb.jp

post-6076-0-17128600-1387141137_thumb.jp

post-6076-0-86106000-1387141157_thumb.jp

post-6076-0-36243600-1387141174_thumb.jp

post-6076-0-30167800-1387141192_thumb.jp

post-6076-0-26773900-1387141214_thumb.jp

Share this post


Link to post
Share on other sites
 
timo4352

Awesome job you've done on this tractor :bow-yellow:

  • Like 1

Share this post


Link to post
Share on other sites
 
eb in oregon

Realistically speaking, your old hubs can be rebuilt. But the time and cost of materials make $300.00 seem cheap. You could bead blast them, fill all the voids with JB Weld, and re-machine to original surface. Or use a file and sandpaper (which takes a mind boggeling amount of time) and for giggles and grins put thread inserts into all the bolt holes. Weld it up? Be serious. The $100.00 each for cast iron seems reasonable. If it were me I'd spend cash for steel, lathe, mill, and weld them, and maybe still have to buy new ones. 

 

I'm currently in a tussle trying to re-manufacture clutch fork shafts for my Windolph Crawler. I made new shafts out of cold rolled steel. They twisted immediately. I made two new shafts out of 4140 and had them professionally heat treated, along with a pair of cold rolled shafts. I tried one of the 4140 shafts just this weekend. After re-assembling that entire right side of my tractor, the shaft fractured. Now I start from square one as I think the cold rolled shafts would break too.

 

If you can buy  "new" parts it's sometimes better than having to make them.

  • Like 1

Share this post


Link to post
Share on other sites
 
Martin

matt, the tractor really turned out nice. i bet your friend would be proud looking down on your tribute to him.....

 

as far as the deck goes, if you can't find reasonable used spindles from your other friend with all the case tractors, just bite the bullet and go new. big investment when you have to rebuild any deck spindles from scratch, but worth spending the extra cash in the end, if only for the piece of mind that you shouldn't ever need to touch them spindles again, except for a little maintenance.....

  • Like 1

Share this post


Link to post
Share on other sites
 
bowtiebutler956

Awesome job you've done on this tractor :bow-yellow:

 Thanks, I appreciate it! 

 

 

Realistically speaking, your old hubs can be rebuilt. But the time and cost of materials make $300.00 seem cheap. You could bead blast them, fill all the voids with JB Weld, and re-machine to original surface. Or use a file and sandpaper (which takes a mind boggeling amount of time) and for giggles and grins put thread inserts into all the bolt holes. Weld it up? Be serious. The $100.00 each for cast iron seems reasonable. If it were me I'd spend cash for steel, lathe, mill, and weld them, and maybe still have to buy new ones. 

 

I'm currently in a tussle trying to re-manufacture clutch fork shafts for my Windolph Crawler. I made new shafts out of cold rolled steel. They twisted immediately. I made two new shafts out of 4140 and had them professionally heat treated, along with a pair of cold rolled shafts. I tried one of the 4140 shafts just this weekend. After re-assembling that entire right side of my tractor, the shaft fractured. Now I start from square one as I think the cold rolled shafts would break too.

 

If you can buy  "new" parts it's sometimes better than having to make them.

 

   I'm very sorry to hear about the very frustrating issues your having with your crawler. I hate it when things go like that!  I do realize that $300 seems cheap when thinking about the necessary work to fix the old ones, but when you don't have $300 you do what you have too. Thank the Lord, I'm not going to have to go threw that, as my friend has some good used ones he's sending me. :thumbs:

 

 

matt, the tractor really turned out nice. i bet your friend would be proud looking down on your tribute to him.....

 

as far as the deck goes, if you can't find reasonable used spindles from your other friend with all the case tractors, just bite the bullet and go new. big investment when you have to rebuild any deck spindles from scratch, but worth spending the extra cash in the end, if only for the piece of mind that you shouldn't ever need to touch them spindles again, except for a little maintenance.....

 

 Thanks Martin, I consider that a great compliment coming from you!  I'm very happy to say my friend had a set of good used cast iron spindles assemblies he's sending me! :woohoo:  This deck would have been sitting a long time if I would have had to spend $300 on it. Things have been a little tight here lately. I will put new bearings in the spindles when they get here, as they're only $3 a piece.  :thumbs:

 

 I got to spend a little time working on the deck today. I welded in a new baffle, as well as a few other pieces that had been broke off. This really is a very strange deck design. I have pictures of other decks to go on, for verifying the missing pieces. I know the welds are very crude, but I'll clean them up. I also rewelded around some previous repairs, that were done poorly. Thanks

 

Matt :flags-texas:  

post-6076-0-96042300-1387237886_thumb.jp

post-6076-0-45618000-1387237916_thumb.jp

post-6076-0-34321900-1387237935_thumb.jp

post-6076-0-14836900-1387237949_thumb.jp

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...