Dieselcowboy 210 #1 Posted November 17, 2013 I have a wheel horse generator that I have used on my B-80. It works it to death so I though we have new toys this year with real hp so lets use them. Tried to install this gen on a 96' 520 with no luck. It fits in the quick tach but sets on the ground. It also seems like the tractor axle / tie rods are just plain in the way. On the B-80 it fits perfectly and plenty far off the ground. What am I doing wrong? Share this post Link to post Share on other sites
varosd 1,185 #2 Posted November 17, 2013 probably the 520's swept axle and steering reduction setup is in the way compared to the B-80?!? any pictures? bet other folks will ring in! Share this post Link to post Share on other sites
Dieselcowboy 210 #3 Posted November 17, 2013 (edited) Glad I started mounting this before I needed it. wife's idea believe it or not. I normally procrastinate till absolutely necessary.we are suppost to have some heavy storms this afternoon here in central Indiana. Edited November 18, 2013 by Dieselcowboy Share this post Link to post Share on other sites
boovuc 1,090 #4 Posted November 18, 2013 Hope you guys are all safe when all is said and done. I would think that even if you did get that generator on your 520, that Onan will drink your gasoline supplies down in a very VERY short amount of time. I hope you didn't need to use it on the B80 or 520 but the B80 will run it much more economically. Share this post Link to post Share on other sites
