69mach 10 #1 Posted November 10, 2013 What kind of linkage runs from the blower to the Bellcrank to lift the blower? Anyone have a pic & or dimensions I could go off of? Is it possible to buy this part? Thanks new here. Mike. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,285 #2 Posted November 10, 2013 One of these may help Garry Share this post Link to post Share on other sites
69mach 10 #3 Posted November 11, 2013 Garry thanks for the links, great info but not what I'm looking for. They are not showing the snowblower frame and how it hooks up to the bell crank. The guy I bought this from can't find the parts anywhere. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,285 #4 Posted November 11, 2013 This manual shows the subframe on page 14. Looks like the frame should connect to the mid quick-hitch and the lift link pushes the subframe down at the rear forcing the front up with the help of the springs. The other manual I see now is missing pages 14-16 where the subframe should be. Garry Share this post Link to post Share on other sites
69mach 10 #5 Posted November 12, 2013 There it is Garry. Yes I see what I need now, It's called a push arm. Going to make one I guess. Thanks for the help & link. Share this post Link to post Share on other sites
stevebo-(Moderator) 8,412 #6 Posted November 12, 2013 I have this blower. The push arm is pretty easy to make. I can get you a measurement later today. Send me a pm if you still need the measurement. Share this post Link to post Share on other sites
