Jump to content
Sign in to follow this  
Actonhorse

K161 magneto ignition coil

Recommended Posts

Actonhorse

I have a 1976 B-60 with the recoil start/mag ignition Kohler K161 on it.  I have been having problems with it for a while now where it quits running when it is warm.  I have narrowed down the problem to the coil.  I believe it gets weak when it gets hot and just looses power.  (it has to be the coil - I have replaced everything else!) 

 

I understand that the coil is nla from Toro. 

 

It is spec # K161T-281269J

 

I have researched on line and come up with part # 47 755 20S as the replacement.  Can anyone tell me if that is the correct coil?  Also I have read that Napa 7-01612 can be used as a replacement for this coil.  Can anyone confirm that this works? 

 

Thanks in advance for any help/advice. 

 

 

Share this post


Link to post
Share on other sites
 
gwest_ca

The 47 755 20S looks correct.

 

The Napa 7-01612 replaces Tecumseh 30560A. It may work on the Kohler also - don't know.

 

Garry

Share this post


Link to post
Share on other sites
 
sorekiwi

Not sure if this is the same coil or not - but this thread may be of some help? 

Share this post


Link to post
Share on other sites
 
WH nut

Have you replaced the condenser?

Share this post


Link to post
Share on other sites
 
Actonhorse

Thanks Garry.  It looks like the same coil and for $24.00 I ordered one and will try it and let you all know if it works or not. 

 

Mike:  I did see that thread but that is a different set up.  The magnets on mine are on the flywheel so that coil is different. 

 

WH nut:  Yes, I did replace the condensor, points (kohler) and plug, I re-routed the fuel lines because I thought they were overheating and creating vapour lock, I checked the fuel pump and it has lots of flow, I cleaned the carb and even put it on my B-80 for a week and it ran perfect.  When the B-60 shuts down it just has a very weak spark and once it cools off it has a nice strong spark again so I am almost positive it is the coil.  Who knows... i've been wrong before. 

 

I'll update once I get the coil on and let you all know how it is working. 

Share this post


Link to post
Share on other sites
 
gwest_ca

Napa shows another magneto coil for the K161. Their number is 7-01628 and Kohler number is 220435-S.

A Stens replacement is 460-071.

Phelon FG02145

 

A Google search found this

John Deere : AM30950
Tecumseh : 14160020, 16330001, 30560A
Phelon : FG02145, FG6240

 

Garry

Share this post


Link to post
Share on other sites
 
Actonhorse

Thanks Garry.  I'll check that out tomorrow.  Its been a crazy weekend and I haven't had a chance to get the coil on yet.  I'll let you know if this works or if I have to look at one of those. 

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...