Kwik Way Loader Jack Stands - Need Some Dimensions

[leeave96 490]

The Kwik Way loader that came with the 520H I recently aquired doesn't have any jack stands with it.

 

Any of you folks with a Kwik Way loader - can you measure your jack stands and maybe post a pic?  Don't look to hard to fab.

 

The model number on my loader is 45-08211.

 

Thanks!

Bill

[Forest Road 594]

I don't have them either. I bought a couple 12" 3/4 nipples. Drilled holes in some 4x4 pieces of wood. Pounded the nipples in and it's all good. The loader really doesn't weigh all that much. This has worked well. I still need to nail a 2x4 to each 4x4 to keep them from possibly "rolling back". If you still want to weld a set this serves as a good model.

[leeave96 490]

I don't have them either. I bought a couple 12" 3/4 nipples. Drilled holes in some 4x4 pieces of wood. Pounded the nipples in and it's all good. The loader really doesn't weigh all that much. This has worked well. I still need to nail a 2x4 to each 4x4 to keep them from possibly "rolling back". If you still want to weld a set this serves as a good model.

 

 

Good info - thanks!!!!!!!

 

Bill