dstriker 2 #1 Posted September 12, 2013 Does anybody have or know where I could find the front mount bracket to hold a generator I already have the generator just need the bracket would rather have an original than make one thanks Share this post Link to post Share on other sites
whtractors24 3,374 #2 Posted September 12, 2013 to bad the pa wheel horse show just passed put a wanted ad in the classifieds section. Share this post Link to post Share on other sites
groundhog47 347 #3 Posted September 12, 2013 Does anybody have or know where I could find the front mount bracket to hold a generator I already have the generator just need the bracket would rather have an original than make one thanks You might find one from a vendor/member here Kelly, if he doesn't you might get some replys from a classified "wanted" post. Other than that ebay. Share this post Link to post Share on other sites
Kelly 1,033 #4 Posted September 12, 2013 Good luck finding all the pieces, I've been looking for a couple years to complete my mount for the factory gen. used parts are hard to come by. Share this post Link to post Share on other sites
Jack Fate 7 #5 Posted September 15, 2013 on my gt-14 my brother fabricated one up .pretty simple on a gt-14 . alas I can't post picture. It uses 5/8" threaded rods as belt tensioners. cheers Share this post Link to post Share on other sites
squonk 43,844 #6 Posted September 15, 2013 I have a homemade one started. It connects to the mid tach a matic and has little wheels on it to roll the jenny around to store it. It's well made and all it needs is a plate mounted to it for the jenny and some way to hold tension on it. I got the complete set up at the show so I don't need it. I would sell it CHEAP! PM me if interested Share this post Link to post Share on other sites
