1978 C-101 Attach-A-Matic pulleys

[AmalgamousProxy 2]

I took a hiatus from working on my old c-101, but I'm back and just ordered a whole bunch of parts to bring the ol' mule back up to par. However, I cannot seem to find part numbers for the V and flat idler pulleys that go in the attach-a-matic mule drive/belt tensioner for the mower deck. I have been on several sites that list c-101 parts, but none seem to cover those pulleys or I'm just looking in the wrong place. Can someone help?

[Wheel-N-It 2,976]

Try TSC or one of the big box Ag supply stores. If you live near Durham, Holder and son Equipment Company have alot of idler pulleys in stock.

[Marv 982]

You will find the part numbers in the mower parts list. That drive is part of the mower assembly.

Marvin

[daveoman1966 3,841]

I have both the FLAT idler and the V pulley for the mule drives.  They can be in your USA mailbox for $52 for the pair. 

Edited September 8, 2013 by daveoman1966

[AmalgamousProxy 2]

Thanks Dave but I am looking for a supply of new ones. I still put my beast to work and the lightly used 35+ year old originals I had didn't last me a summer.

 

The TSC near me is rather small. To make matters worse this is a fresh store (about 1 year old) their staff is full of college kids. I have learned to never ask them for something specific, 99.9% of the time they end up looking through their catalogs like a monkey looking at a math problem. 2 hrs later I get "Sorry sir, you'll have to find a wheel horse dealer." Then I'll get fed up and go look around myself and find one on the shelf... Oh well, what can you do?

[MalMac 1,332]

They should still be available from Toro. Like everything else Toro will charge a huge amount. They are a common pulley and should be relative easy to find. If all else fails go to Napa they can probably get them for you.

[gwest_ca-(File Mod) 11,493]

V-idler Toro 92-7103

Replaces 104974

Stens 280-750 HD

Napa 7-05486

 

Flat-idler Toro 104975

Replaces 101762 and 104144

Stens 280-743

 

Some 1978 mower deck model numbers

85-36MR01 (there is a typo @ Toro on this one 86-36MR01 in the attachment list)

85-36MS01

85-42MR01

85-42MS01

 

Garry

[tarcoleo 119]

Check out-

 

http://www.mfgsupply.com/mower/mowerpull.html

 

Measure pulleys to be replaced and find on their web site. They offer low prices

and have most any size.

[AmalgamousProxy 2]

Thanks everyone for the information. I was able to use your information to locate the pulleys I needed and at a good price too.