1987 310-8 Drive belt replacement

[DoctorHfuhruhurr 137]

I have realized a similar topic came up recently but I didn't want to hog that topic with my question.  I have a 1987 310-8 where the drive belt disintegrated into 100 pieces while my tenants were mowing.  I have a replacement belt and have removed the belt guard but I'm unclear as to the routing because there is no original belt left.  Is there a diagram somewhere or pictures showing the routing and on which pulley groove things go?  It's been a long time since I've done anything mechanical so I have lots of brain rust.  Any guidance/suggestions would be greatly appreciated.  

 

I didn't see what I needed in these two manuals.  

http://www.wheelhorseforum.com/files/file/331-tractor-1987-300-series-om-pt2-810473r1pdf/

[WH nut 553]

Around the inside engine pulley, over the V clutch idler and around the trans pulley

[timo4352 147]

Maybe these pics will help

Mine is an '85 but maybe the same?

 

[DoctorHfuhruhurr 137]

Perfect!!!  Thank you both!