cw2 shaw 0 #1 Posted August 28, 2013 I just picked up the raider 10. I am new to working on these things and need some help. The engine surges when it is running. It looks like there are a lot of adjustments that could be out on the govenor and or carb. Does anyone have a picture of how the linkage should be set up? Any help would be greatly appreciated. Share this post Link to post Share on other sites
KATO 115 #2 Posted August 29, 2013 Hope these help And WELCOME TO Share this post Link to post Share on other sites
cw2 shaw 0 #3 Posted August 29, 2013 Awesome pictures! As soon as I get a chance to look at mine I will let you know if the linkage was the problem. I did have one question. On the third picture down there is the arm that that the throttle cable connects to on the right. On the lower left of that arm is an adjustment screw that goes through the block. What is that and how should it be adjusted? Share this post Link to post Share on other sites
KATO 115 #4 Posted August 31, 2013 that is the MAXIMUM RPM adjustment screw should be set at 3600 rpm Share this post Link to post Share on other sites
