Came home with a FREEBIE!!!

[Teddy da Bear 11]

After my brother in law's kids had their way with it......sigh....

I have 90% of a 656. Give or take 10%.

I will not try to restore this one.

I will lovingly dismantle it and be parting it out to those that would like to add the parts to their project.

This is unfortunately what happens when one person doe not know the meaning of "wheel horse".

Everything is very straight. Deck seems complete except grease caps.

Came with a mid 60's plow. I will have to think about whether to part with that or not. Engine is almost complete....just not much good without the head.

I will also put up a picture tomarow....when it is light.

[Docwheelhorse 2,740]

List it on Ebay and see if it can be "saved".... Any 'Horse being lead to the slaughterhouse makes me cry.... even if it is a "friendly" slaughter to save others....

It sounds like it may be still on the right side of that magic "too far gone to save" line...

I can hear it from here

Tony

[Teddy da Bear 11]

Doc.....in a sense I did save it.

They were going to send it to the scrap man. Never to be seen again.

I just do not have the time to do it justice.

But if you make me think about it too much I may take it off the selling block...lol

[Docwheelhorse 2,740]

How about a TWIN ENGINE 656 :banana:

Tony

[Teddy da Bear 11]

Awwwwwww....Doc..... B)

[WH854 45]

I saved part of a 656 the transmission,drive belt cover,deck engaging pedal

and mowerdeck ingaging pulley,front quick hitch,steering assembly.

The fellow had the rest cutup for scrap. :imstupid:

Chas From Butler Pa B)

[Kelly 1,033]

If you part it out let me know, I might be interested in parts.

[Teddy da Bear 11]

Here are the stats and the pics.

Tractor: Model 1-656

Serial 255364

Engine: Tecumseh/Lauson 6 hp. Electric & Recoil

Model HH-60 105-13A

Sereial 6119 04510

Deck Model/Serial:unknown Measures a 32" r/d

Plow Model/Serial: unknown Measures 42"

What I found missing...seat spring, dash panel, throttle & choke cable, wiring harness, shift knob, engine head and those are the major things.

I am going to go back to the "scene of the crime" and see if I can find anything else.

Here are a couple of pics.

Attached Image

[Teddy da Bear 11]

one more pic.

Attached Image (Click thumbnail to expand)

[Teddy da Bear 11]

I have one of these engines from my Lawn Ranger........hmmmmmmm

Doc this might be all your fault!

[Stigian 1,234]

Looking at those pic's.....

"Now available in kit form" springs to mind :banghead:

[Teddy da Bear 11]

Never mind this posting.......wrong place.......sheeeesh.... :banghead:

[Docwheelhorse 2,740]

That poor thing looks like it jumped on top of the grenade to save all of his buddies... I guess I'll retract my "save it" statement....

Tony

[Teddy da Bear 11]

I was looking at the underside of the deck from the 656.

I guess the brother in law does not believe in spending money for blades.

I also found remnents of a garbage bag and some twine rapped around these blades and spindles.

Notice that my index finger is the same size as the remaining width of the blade......

Attached Image