posifour11 723 #1 Posted August 24, 2013 I came across this little gem yesterday. The PO was planning to take it to the scrap yard. He had rebuilt the transmission then his son lost interest. No model # but the serial number is pictured below. Any ideas? 1 Share this post Link to post Share on other sites
sorekiwi 761 #2 Posted August 24, 2013 (edited) Probably '63, 62 had solid front tires, 64 had a different hoodstand. 33E was electric start, 33R was recoil only. Edited August 24, 2013 by sorekiwi 1 Share this post Link to post Share on other sites
Lane Ranger 11,410 #3 Posted August 24, 2013 I agree with Mike. Hard front wheels would make it a 62 and battery bos makes it look like an electric start model! Just saw one earlier in the week that sold for $50. Share this post Link to post Share on other sites
posifour11 723 #4 Posted August 24, 2013 (edited) OK. I was kinda thinking 63. Now what do I do with it? Not too keen on fixing it. Just didn't want to see it go to scrap. What's one of these worth? Edited August 24, 2013 by posifour11 Share this post Link to post Share on other sites
slammer302 2,156 #5 Posted August 24, 2013 I almost bought that same lawn ranger but found a 857 that i had to have i called the guy and everything what a small world i love the lawn ranger i have all ready I'm sure if you get it going you will enjoy it. Share this post Link to post Share on other sites
slammer302 2,156 #6 Posted August 24, 2013 Sent from my DROID RAZR using Tapatalk 2 Paid 100$ for mine Share this post Link to post Share on other sites
sorekiwi 761 #7 Posted August 25, 2013 I'd probably do something like this: Share this post Link to post Share on other sites
AMC RULES 37,196 #8 Posted August 25, 2013 I'm thinkin' a 16 horse thumper would fill that hole nicely. 1 Share this post Link to post Share on other sites
posifour11 723 #9 Posted August 25, 2013 Sorekiwi, I like the looks of that. Would be a cute little wagon puller. Slammer, it is indeed a small world. Craig, I do have a 13hp harbor freight engine, but I think that's a bit much. What do I do about a right footrest? Did they not have them? Were they on the deck? Share this post Link to post Share on other sites
sorekiwi 761 #10 Posted August 25, 2013 What do I do about a right footrest? Did they not have them? Were they on the deck? TT posted some measurements and pictures of one a while ago, it was a piece of bar with a sleeve that slips over the stub on the frame and clamps with a lock screw. I've been meaning to make one for about 5 years now. I'll post the link when I find it. Share this post Link to post Share on other sites
posifour11 723 #11 Posted August 25, 2013 That makes sense. Seems easy enough. Share this post Link to post Share on other sites
posifour11 723 #13 Posted August 25, 2013 Thanks! I can do that! This little thing may get my gears turning after all. Share this post Link to post Share on other sites