Engine swap from newer style k301 to older style k301 PROBLEMS !!

[tommybro 1]

Hi, I am having problems switching from a newer style k301 ( with a starter to the flywheel ) to an older style k301 ( with a starter generator ) the Kohler with the starter generator will do nothing but spark when you put on the key, you can hear and feel it through the spark plug.

 

This tractor is a charger 12 the old motor had a major gouge in the cylander and the newer / older engine was free !

 

On the ignition switch I have:

2:00 Goes to starter

3:00 Battery

6:00 Empty

9:00 + side of coil

11:00 Empty

 

On the starter generator from left to right

1: Empty

2: Battery

3: Goes to ground on starter

Red wire from under box goes to starter bolt with wire from 2:00 ignition switch

 

Coil

+side 9:00 from ignition switch

-side condensor and points

 

Battery is grounded to the block on the extra hole on bottom of block sanded well for good contact.

 

Please help this is driving me crazy

[SousaKerry 503]

I would look up the wiring diagram from a 1257 or similar tractor from the 60's with the same motor setup

[gwest_ca-(File Mod) 11,703]

Starter/generator wiring

http://www.wheelhorseforum.com/files/file/621-tractor-1967-1257-om-ipl-wiring-310pdf/

 

This Kohler manual also has a diagram

 

Garry