Need D-Series Front Wheel Bearing Part Number

[duke 49]

I am searching for the Wheel bearing part number used on the 8 inch wide front rim and 3/4 spindles. (3/4 x 1-15/16ths)Any help would be greatly appreciated.

[Marv 984]

Duke,

What model used a 3/4 spindle? I thought they were all 1".

Marvin

[duke 49]

The 18 Auto used a 3/4 spindle and some D-160's. I am trying to get a replacement front rim for the 18 Auto, not an easy task!

[gwest_ca-(File Mod) 11,524]

3/4"x1-3/8"x3/8" Wheel bearing 4999 Replaced by 110513

 

Napa 7-04292, HD 7-04232,

Stens 215-210 Flanged wheel bearing

 

Some of these bearing now have two seals and can not be greased. The ones with one seal on the outside can be greased.

 

Where are you getting the 1-15/16" dimension?

 

Garry

[Trouty56 567]

My 180 has the 3/4 inch spindles......guess the 1 inch was an option on anything less than the 200 maybe.....  There was a lot of D series at Dave's Tractor when I used to scour the yard and they all were 1 inch there.  Mostly D-200's though.....

[Trouty56 567]

Garry.....I was looking for a replacement for a wheel on my D when I first got it.  It had an axle with a 3/4 inch spindle on 1 side and a 1 inch on the other.....  I replaced the axle with one from a carcass that had 3/4 inch on both sides (maybe this was an 18 auto carcass and why mine are 3/4).  I tried to find a bearing to replace the 1 inch wheel to reduce it to 3/4 but could not find one.  I thought it was 1 7/8 outside though....  I used a brass bushing to go from 1 inch down to 3/4....

[gwest_ca-(File Mod) 11,524]

I am realy confused now

 

An original 1975 parts list show all 3 D-Series Autos using the 4999 3/4" wheel bearing

The spindles list a #5700 1" E-ring retainer. (This may be for the top of the king pin)

The flat needle bearing and flat races on the king pin are 1"

 

Parts Tree list a 1" wheel bearing for the wide cleat tire wheels for the same 1975 models. I have 1.000"x1.875"x1.000"? in my notes.

 

The original parts lists may all be wrong for the wheel bearing.

 

Garry

[duke 49]

The 1-15/16 is the size of the hole in the hub of the rim. The rim is NOS 104399. The spindles on the 18 Auto are 3/4 and the original rim 102392 is really hard to find! So I went with the 104399 rim from the D-200 however the bearing is extremely rare! 1-15/16 OD by 3/4 ID. There was a spindle kit at one time. but now it's all in the past! A friend has three of the four bearings, very expensive!

Edited August 8, 2013 by duke

[jerry potaracke 3]

hello duke did you ever get your bearing problem solved i to am looking for a set of bearings 1x17/8 for my d160 the bearing seem to be nonexistent i have tried for weeks to find the bearings or an entire wheel i may have to have the machine shop build me a new 1''x2''hub 

[Macgyver 109]

I'm not familiar with the bearings in that model. Are they tapered like the 520s with a race? If so I may have  both bearings and races..