CTBT&D 77 #1 Posted August 4, 2013 A bit of history first. Four years ago I traded my 1993 266H with 48" deck for a 1991 416H with 48" deck, 42" single stage snow thrower, 42" plow blade and a 36" tiller even up. I've had everything mounted since then except the tiller. It leaked oil from the gear case and I finally got around to repairing it late last winter. So I decided to mount it on the 416-8 and was missing some pieces, as in a lift cable and chain. This part was left over and I have no idea what it goes with, it measures 3/4" diameter by 9 1/2" long. Hoping somebody recognizes it. Craig Share this post Link to post Share on other sites
GlenPettit 1,717 #2 Posted August 4, 2013 (edited) It's not, but looks similar to the axle shafts for the front rollers on mower decks, the small hole secured the shaft to the bracket with a screw. Edited August 4, 2013 by GlenPettit Share this post Link to post Share on other sites
