Mule attach-a-matic mule drive

[hckypck7 1]

Hello

I have a 520 h WH .

I was mowing this evening when one of the pulleys on the mule drive went out.

My question is can I replace just the pulley or do I have to replace the whole mule drive attach

-a-matic ?

[47JDG 65]

You can just replace the pulley. I did the same thing when a pulley went out on a 520-H my dad owns. I used a pulley for the mid mount idle setup used for a rear tiller attachment. They were the same pulley...but now I need to find another pulley so I can use the tiller again.

[groundhog47 347]

Taking a stab, looked at a 1988 520H mower deck mule drive in manuals. If it's like one there as listed the 2 pulleys on the mule drive are removable and as reference are parts # 35 and 37 for the 05-42mro4/5. Can no affirm that is one you have, but more than likely is similar.

Edited July 24, 2013 by groundhog47

[SPINJIM 1,986]

Yep, just replace the pulley.   You might find the part number on this site under the "Manuals" section.   I bought one for my C-85 mule drive.    I think you can get it from your local Toro dealer,  or it might be cheaper on ebay if you have the part number.

   Jim

[Tankman 3,523]

Pricy, new. Wouldn't expect less from TORO.

 

You can find the entire mule drive on eBay cheaper but, used and doubt you would ever use it.

 

Take a peek-a-boo here; Items 35 & 37.

 

http://www.partstree.com/parts/?lc=toro_consumer&mn=E5-48SC01%2C+48%22+Side+Discharge+Mower%2C+1988&dn=3328-950-_9500022-0008