HokieAg07 129 #1 Posted July 7, 2013 Looking for some help guys, my 96 520 does not have a seat switch, it had been bypassed. Looking at pictures of the proper switch I am not sure how it is attached to the tractor, it is much different than the ones on my other Wheel Horses. If someone could take a picture of the switch and how it is attached I would appreciate it! Share this post Link to post Share on other sites
BOWTIE 226 #2 Posted July 9, 2013 Hello,w heel Horse made three model numbers of the 520 in 1996. There is two types of switches in 1996. one mounted in the fender it is a push button type. the other was in the seat pan under the vinyl cover. Do you have the original seat on tractor? Model number would help. BOWTIE Share this post Link to post Share on other sites
HokieAg07 129 #3 Posted July 9, 2013 Based on the model of the tractor I should use the strip in the seat pan. I do not have the original seat however so I suppose the other type which mounts to the fender pan would be the one to use ? Share this post Link to post Share on other sites
OhioGregg 6 #4 Posted July 9, 2013 Looking for some help guys, my 96 520 does not have a seat switch, it had been bypassed. Looking at pictures of the proper switch I am not sure how it is attached to the tractor, it is much different than the ones on my other Wheel Horses. If someone could take a picture of the switch and how it is attached I would appreciate it! Mine is a 1994 model 520. The switch is in the seat pan, directly between the rail & pan. (factory seat) I couldn't get a picture to post.. Gregg, Share this post Link to post Share on other sites
BOWTIE 226 #5 Posted July 9, 2013 Chris, you can to a auto parts store and a brake light switch for a 1960's early 70's GM product. it is adjustable for different reach maybe 1/2" to 1 1/4", good luck BOWTIE Share this post Link to post Share on other sites
