Ready to rebuild my K321, what do I need?

[Wheelhorsedairyfarmer 13]

Alright, so I'm planning on rebuilding the engine in my C-141. However, I can't find a "rebuild kit", and I don't know exactly all the parts I need to rebuild it. I know piston, rings, and rod, but I don't know all the other little pieces I will need. Anybody have a parts list for rebuilding? 

[Fordiesel69 271]

http://www.ebay.com/itm/Master-ENGINE-REBUILD-KIT-FOR-K321-14hp-KOHLER-w-Valves-/140986547319?pt=LH_DefaultDomain_0&hash=item20d373fc77#ht_3491wt_1091

 

This will do as well as getting the crankshaft and cylinder measured before ordering the kit.

 

Simple tear down, measure, machine, clean , reassemble.

 

Just did two of the K301's with great sucess.  Just check the cam lobes so you don;t have to do it twice like it I did.

[diesel cowboy 263]

While your in there you might as well do the gov. gear and shaft.  Even if they dont look bad its worth the few bucks to replace them.  Had a couple break on me afte I put the engine back together and it had to come completly back apart cause there the first parts to go in.

 

Stewart

[oldredrider 2,553]

The most important thing you will need is the Kohler engine manual. You can download it from their site.