proshop 0 #1 Posted August 16, 2008 I have a b-100 auto that im restoring and it was running before I took it apart. I did not do an engine off but close. now I have it back together and the starter turns over but no spark comming out of the coil I took the volt meter off,the resistor looking thing that lives on the same pannel just above the v meter and the starter switch.I am going to the store to get a 9 volt batt for my volt meter as i left it on the last time i used it and now it's dead. I have a ton of pic's to put on the sight but have not figured out how yet. alot are from a camera phone and others are from a new camcorder that takes movies and pic's. I'd like to put some on u-tube but not sure how to do that eather,It needs to run first though :whistle: Share this post Link to post Share on other sites
Teddy da Bear 11 #2 Posted August 16, 2008 They use photobucket here. I believe there is a posting here somewhere on using it. B) Share this post Link to post Share on other sites
Sparky-(Admin) 19,872 #3 Posted August 16, 2008 Heres the Photo info Mike......... http://www.wheelhorseforum.com/index.php?showtopic=1071 Share this post Link to post Share on other sites