HokieAg07 129 #1 Posted June 11, 2013 Noticed my 416 was not charging the other day. Determined I had no battery voltage at rectifier and that led me to a blown fuse. Stator putting out about 40-43 VAC. I did put a spare 15A fuse in and it charged but blew the fuse pretty quick. Upon looking at my wiring diagrams it shows this fuse to be a 30A, the tractor had a 15A fuse. I assume the 30A would be correct but I do not want to double the fuse only to melt something if there is actually an issue. Any ideas? Share this post Link to post Share on other sites
WH nut 553 #2 Posted June 11, 2013 Nope, if it calls for a 30 put it in andwatch it to make sure nothing gets hot. Share this post Link to post Share on other sites
HokieAg07 129 #3 Posted June 12, 2013 All seems well, replaced the fuse with a 30 amp and used an ammeter to check, only drawing 7-8 amps. Share this post Link to post Share on other sites
