putterman 4 #1 Posted June 3, 2013 I need a drive belt to go from engine to transmission of my 1975 B-80 and I can't seem to find the correct size. I would appreciate some help from you experienced Wheelers. Share this post Link to post Share on other sites
Lane Ranger 10,495 #2 Posted June 3, 2013 (edited) That's a Wheel Horse # 7473 Drive Belt! Toro 7473 {HB/5Lx81.95"}, 6982 Gates 21/32"x82", 5L820W Napa 21/32"x82", 258-082 Stens 5/8"x82" Edited June 3, 2013 by Lane Ranger Share this post Link to post Share on other sites
bowtieguy 334 #3 Posted June 4, 2013 I'll use the same post to ask this same question....what is the correct belt that drives the HY sytem on a 704?...3/8" looks too small ...1/2"looks too large...my belt chart does not list a belt for this option....or maybe I have overlooked it....thanks in advance for a reply. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,503 #4 Posted June 4, 2013 I'll use the same post to ask this same question....what is the correct belt that drives the HY sytem on a 704?...3/8" looks too small ...1/2"looks too large...my belt chart does not list a belt for this option....or maybe I have overlooked it....thanks in advance for a reply. HY-2 and HY-3 Wheel Horse 1584 no longer available (HY-2 manuals show 3Lx51" which is correct and 5Lx51" is wrong) 6951 Gates 21/32"x51", Wrong Should be 6751 3/8"x51" 5L510W Napa 21/32"x51", Wrong Should be 3L510W 3/8"x51" Garry 1 Share this post Link to post Share on other sites