peigt14 19 #1 Posted May 25, 2013 elec. mag. pto clutch is shot, need info to convert to manual set up if possible, early 70's gt 14. Any info would be helpful. Not many of these in my area (pei canada) and want to keep this one working as long as possible. thanks Share this post Link to post Share on other sites
Don1977 605 #2 Posted May 25, 2013 I think it could be done. I don't have are have seen a GT-14. Some parts may need to be made or modified. The first is the bottom attachment of the loop, and not sure if the engagement lever is long enough to go all the way trough the GT hood stand. Share this post Link to post Share on other sites
papaglide 542 #3 Posted May 25, 2013 I actually am contemplating the same thing. Firstly, the 14 horse Kohler thats in my tractor isn't original to the tractor. Secondly, I am installing a pre quick attach manual PTO clutch.( the kind thats on a 69 raider 10). That style engagement lever is long enough to go from the pto clutch to the hood stand. I will have to drill and bolt the lever bracket to the hood stand. The bracket will have to be shimmed out about a half inch to make the lever to clutch evenly matched. It seems to be a pretty straight forward operation. Hope that this helps. Share this post Link to post Share on other sites
