raider 12 mower deck

[boondockboost 34]

hey everyone. new to the wheel horse scene and i had a question. i picked up a raider 12 and it came with a deck but it didnt have the belt with the tractor. the belt that goes from the clutch to the mower deck i was wondering if anyone had an idea of a belt number or any info on the deck attatchement to the raider 12.  i will post pics when i get home so it can help you see the setup. thanks for the help,

[gwest_ca-(File Mod) 11,757]

What is the width of cut, number of blades and side or rear discharge?

 

Garry

[boondockboost 34]

its a 3 blade rear discharge and i mesured it and it came out to right around 44"

 

[boondockboost 34]

Uploaded with ImageShack.us

 

[boondockboost 34]

Uploaded with ImageShack.us

 

[gwest_ca-(File Mod) 11,757]

Must be a 42" width of cut rear discharge but the 1st was 1976 model 65-42MR01 Replaced by 75-42MR01, 75-42MR02, 85-42MR01, 95-42MR01, 95-42MR02, 05-42MR01, 05-42MR02, 05-42MR03, 05-42MR04, 15-42RC01, 15-42RC02, 78350

 

Drive belt is

Toro 108834 [1/2"x98"]

 

 

6898 Gates 1/2"x98"

 

4L980W Napa 1/2"x98"

 

Spindle belt

 

Toro 6738 {HA/4Lx86"}

 

6886 Gates 1/2"x86"

 

4L860W Napa 1/2"x86"

 

 

Garry

[boondockboost 34]

Man thanks a lot for the help. Now does it go from the clutch on the side to the spindle on the front of the tractor? They guy I bought it from didn't know anything about it. But me niether. I tried looking for pictures of how the belt was ran but couldn't get any good views. And I'm guessing that there's two belts that drive the deck not including the one that runs the blades? I really appreciate the help.

[gwest_ca-(File Mod) 11,757]

Should be one belt to the deck and a second on the deck around the spindles.

Go into the manuals and search for 42MR01 or the tail end of the others listed above. The search does not like the dash so don't enter it. The OM is operator manual.

 

Garry

[WH nut 553]

Looks like someone Modified to take the newer deck. I have dont that to mine also so I can run either deck

[Tankman 3,523]

 

Looks like someone Modified to take the newer deck. I have dont that to mine also so I can run either deck.

Doesn't look like my '68 Raider 12's deck. Take a peek-a-boo here for diagrams.

http://www.partstree.com/parts/?lc=Toro+Consumer&mn=e5-48sc01

[oldredrider 2,553]

You are missing the rear trunnion rod. You will need that to level the deck.

[boondockboost 34]

Uploaded with ImageShack.us

 

 would this happen to be it? i got this tractor in parts for the most part and i dont really know how to put the deck back togther to get it to work so if anyone has pics it is greatly appreciated.

[oldredrider 2,553]

That's the lift bar. You need part #'s 23 thru 26 here:

http://www.partstree.com/parts/?lc=toro_consumer&mn=E5-48SC01%2C+48%22+Side+Discharge+Mower%2C+1988&dn=3328-950-_9500016-0005

[boondockboost 34]

So if I put the parts 23 threw 26 that will help level the deck cause when I hook it up only the rear of the deck lifts up I can't get the front