42 inch sd parts

[gcole 36]

Hi guys I was wondering if you guys knew the were I could get blades for my 42 inch sd and what type is the best to use. I also need a front roller for it aswell and wondering were to get one of them.

Thanks in advance. Graham

[gwest_ca-(File Mod) 11,492]

There has been 17 different models of mower decks like yours since 1975 so you need to identify what you have.

Take a look at this ipl paying attention to the blades and their center hole. Best to take them off and see if you have the 5/8"x3/4" double-D mounting hole in all the blades. Replacement spindle assemblies could have a different shaft so different hole. Here is a poor parts list

Looks like the roller also has bushings in it and both will likely have to come from Toro.

 

Here is a Stens dealer in Ontario that has given me excellent service

http://www.bantasaw.com/

 

If you want a better look at the parts list go to

http://www.partstree.com/parts/

Type Toro in the 2nd box and the 5-1011 model number in the 3rd box. This is a 1975 deck. The parts that are priced should be available from any Toro dealer.

Adding - 5-1011 is blank now. Try 5-1010 (1973-74) and 5-1012 (also 1975)

 

If you have an Ideal Supply they are a Napa dealer here.

 

Operator manual

 

Garry in Parry Sound

[Tankman 3,523]

For reference take a peek-a-boo here.

http://www.partstree.com/parts/?lc=Toro+Consumer&mn=e5-48sc01

[Forest Road 594]

Clean them up and look for a number stamped on top. It's most likely an Oregon number. Google it

Or take one to a local dealer. They probably have something in stock.

[can whlvr 994]

there is still a toro dealer in orangeville,henrys lawn and garden on broadway,they do stock the newer blades and if they order you dont pay shipping

[gcole 36]

Ok thanks guys