boovuc 1,090 #1 Posted May 16, 2013 Well I finally had time to solder in a couple of diodes in the 310 tonight. My plow horse was charging at 16 VDC all winter long. With the exception of a little "sticky-outy" horseshoe shaped wire at the harness now, I'm charging at a steady 13.5 to 14 VDC regardless of engine RPM. Thanks for all the help from everyone and of course from "SOI". Now I have a tractor and deck that fits inside my fenced in "Dog Droppings Zone". If I miss a "pile" and I push mow, it can get messy! 1 Share this post Link to post Share on other sites
Save Old Iron 1,563 #2 Posted May 16, 2013 You're welcome Boo. I think .......... SOI technology used on the "cutting edge" of excrement evacuation. Just the thing I was hoping to accomplish with all my years of experience !! Glad my fix was able to put you back into the "Danger Zone". Next year we might have a heads up display for the 520's with forward looking infrared to help you avoid contact with fresh stealthy "steamers". Share this post Link to post Share on other sites
boovuc 1,090 #3 Posted May 17, 2013 Always remember to use a side discharge deck in the drop zones. Rear discharge, (just like the dogs), tend to pile up on the rear tires! Thanks again, SOI! Share this post Link to post Share on other sites
