brooklynmike 0 #1 Posted April 29, 2013 Hi All, I am new to the site and a brand new wheel horse owner. I can't find any good info on how to have a loader added to my WH. I am not handy enough to do it myself. My place is in Stone Ridge, NY which is 2hrs north of NYC. Do I need to by an aftermarket product? Does someone make them? Any recommendations? Sorry if this is too basic of a question. Thanks in advance! Share this post Link to post Share on other sites
312Hydro 473 #2 Posted April 29, 2013 Hi, 2 Use the search box in the upper right corner. Type in "FEL" and search "Forums" not "This Topic". A wealth of info will pop up! Hope this helps,Rich Share this post Link to post Share on other sites
brooklynmike 0 #3 Posted April 29, 2013 perfect....thanks!! Share this post Link to post Share on other sites
MalMac 1,328 #4 Posted April 29, 2013 There are not anymore manufactures out there making Wheel Horse specific Front End Loaders. You can look in the classifieds, Creigslist or E-bay. Occasionally they pop up. The last company to make a Loader for Wheel Horse or I should say Toro Whee Horse was Kwik-Way Manufacturing. Sometimes Kwik-Ways pop up that are for other brands that can be converted with the making of a sub frame that will fit a Wheel Horse. Another Manufacturer was Ark Loaders. They pop up from time to time also. A front end loader is usually quite sought after so if you find one you must act quick. Share this post Link to post Share on other sites
Forest Road 594 #5 Posted April 30, 2013 Watch Craigslist and be patient. You'll find one. A decent one will probably run $3000 and up. I have a 522xi with one and am happy. I'd prefer a Kubota but this fit the budget and has completely eliminated the wheel barrow. Good luck! Share this post Link to post Share on other sites