What is the Onan Carb model for 520 HC

[westkane 1]

Can anyone tell me what the carb model is for the 520 HC, and where to find a reasonably priced rebuild kit? The kits that I have seen are in the $100 range and that seems awfully high for a kit. Thanks for your input. I also have written down in my manual that its motor is a P220G-171051B        F883391730 , which I must have taken off the motor itself in years past - the id plate is now unreadable, however the manual says it is a P220 on the 520 HC, and P220 on a 520. Not certain what the difference is and if they have different carbs.  It makes it hard to look up parts, when I don't know which I have.  Any parts listing links?  Thanks again for helping a newbie

 

[gwest_ca-(File Mod) 11,512]

There are Onan part numbers posted at Toro.

https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro

Type in 520-HC and a link to the parts lists will come up on the right.

 

If you want to print a page click on the small printer icon at the top left of the illustration.

 

Garry

[MarkPalmer 81]

Every carb I have come across on an Onan Performer engine was a Nikki, in either non-emissions (adjustable jet) or emissions style (non-adjustable.)  The standard kits range from $80-100, which yes is stupidly expensive, considering you can buy a whole brand new carb for about $150.00.  But that is the way of the world with Onan today, what is left for parts are getting prohibitively expensive. 

 

-Mark-

[Martin 2,133]

ive come across this company, prices very reasonable. from what ive worked out by talking to the owner on the phone earlier today, they get a lot of onan parts manufactured for them. im in the process of ordering from them some parts for the t260 im rebuilding and i was told the majority of their stuff is us made.

heres the nikki carb kit.....

 

http://www.gphope.com/store/37