tractorbeast 27 #1 Posted April 24, 2013 Does the rear lift cylinder come attached with a rear PTO setup normally. In looking at the the parts sheet on Partstree, it doesnt show a lift cylinder. Share this post Link to post Share on other sites
tractorbeast 27 #2 Posted April 24, 2013 Also, is there a manual for the C-195 rear PTO. Share this post Link to post Share on other sites
refracman 167 #3 Posted April 24, 2013 The PTO does not require a lift cylinder, but the 3pt does and it should come with the cylinder and lines. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,510 #4 Posted April 24, 2013 Not aware there was a manual for the rear pto. Toro has changed the original 8-3231 model number to 83231 https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro for the parts list. Click on the printer icon at the top left of the illustration. Mentioned in this service bulletin Garry Share this post Link to post Share on other sites
baerpath 517 #5 Posted April 24, 2013 There is a seperate manual in my extra one I'll have to get it out. Might take a few days I'll see if I can figure out how to scan it Share this post Link to post Share on other sites
tractorbeast 27 #6 Posted April 24, 2013 Thanks, I understand now. I was assuming the 3 point lift assembly, was part of the rear PTO. I see now they are seperate units. Share this post Link to post Share on other sites