1998 314-8 clutch grabs

[wheelhorsin1974 6]

very hard to pull out without getting whiplash. very annoying. would a new belt help???

[gwest_ca-(File Mod) 11,510]

The drive belts must be completely covered with fabric. Some have raw rubber sides and they will not slip as the design calls for. You may also have a shock damper connected next to the belt idler pulley that is not working correctly. Many remove it and use the spring used on the earlier models to pull the clutch rod back on the left side. The spring hooks into a web above the left axle housing.

 

Garry

[wheelhorsin1974 6]

As always. The answers i need. Thanks. I appreciate it

[decksetter 50]

My 416-8 did that, the problem ended up being the footrest was too tight and holding the side cover in on the pulley.

[wheelhorsin1974 6]

Thanks. Ill check into all of these possible issues. Appreciate it guys.