redidbull 54 #1 Posted April 3, 2013 I have a 8HP vertical shaft on my Ranger tractor. I am looking for a card for it but find no number on it. I also have looked on ebay, there are hundreds, but mine has an adjustment screw through the bottom of the bowl.Which carb should I be looking for? Thanks for any help. Jim Share this post Link to post Share on other sites
wheeledhorseman 573 #2 Posted April 3, 2013 I'll upload the Tecumseh Manual 'Carburettor Identification and Troubleshooting'. Lots of pics and info on the carbs they used over the years so I think it will help. I'll add the link to this thread when I've done it. Andy Share this post Link to post Share on other sites
wheeledhorseman 573 #3 Posted April 3, 2013 Uploaded - here's the link Hope this helps you id your carb - Andy Share this post Link to post Share on other sites
redidbull 54 #4 Posted April 3, 2013 Thank you but it says I do not have permission to open it. Jim Share this post Link to post Share on other sites
wheeledhorseman 573 #5 Posted April 3, 2013 Don't understand that but if send me your email in a pm and I'll send it to you direct Andy Share this post Link to post Share on other sites
redidbull 54 #6 Posted April 3, 2013 I got it Andy thank you. May have been my work computer. Jim Share this post Link to post Share on other sites
redidbull 54 #7 Posted April 4, 2013 Thank you. Looks to be a 631792 Series 3 carb. Rebuild kit 631180. Who do you al suggest me get the kit from? I want to support RS vendors. Thanks again. Jim Share this post Link to post Share on other sites
